Terminal log file
Date: 26.03.2018 - 18:22:37
-----------------------------------------------
ü
---------
  RESET
---------
----------------------------------
| LWPM Comfort Module v0.2x5
| revision:         DEBUG: 2018-03-22/FS#4/9645aa1+
| serial number:    DPF/A5E04E00
| hardware version: v1.0
| reset reason:     0x03
----------------------------------
device initialized

--> configuration read
--> Display init

!!! SLEEP !!!

!!! WAKE UP !!!
--> keyin changed 0 -> 4
--> no activity on MSCAN detected...
GMLAN_Send(6C2, 10 bytes) timeout!
--> keyin changed 4 -> 5
>>>> device is visible NOW!
--> keyin changed 5 -> 6
GMLAN_Execute2(7E0, 0x1A/97, 0 bytes) timeout!
--> engine on handled
--> update ECU status
DETECTED ENGINE: Z19DTH, (null), DPF: 1, use: 1
--> engine on handled
--> update ECU status
--> update ECU status
--> start needle sweep (900 ms)
--> update ECU status
--> update ECU status
--> stop needle sweep (after: 900 ms)
--> update ECU status
--> Z19DTH: 0 errors
--> update ECU status
GMLAN_Send(6C2, 34 bytes) timeout!
--> update ECU status
--> no KEY-in status received within... requesting from CIM...
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x82, count: 1, action: 0x23, repeat override: 0
--> activation request, screen: 4
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 08
--> [KEY-UP] PID: 0x201, ID: 0x31, time: 200ms
--> no action found for key: 0x02, count: 2
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 02
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 01
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> keyin changed 6 -> 7
--> keyin changed 7 -> 6
--> update ECU status
--> engine start handled
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
GMLAN: command [AA] error: 31
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: 80
--> open item, screen: 0, item: 02
DISPLAY: get screen definition: 01 / 82
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> keyin changed 6 -> 0
--> engine off handled
--> update ECU status
--> keyin changed 0 -> 6
>>>> device is hidden NOW!
DISPLAY: execute command at: 0, cmd: 90
--> engine stopped handled
DETECTED ENGINE: Z19DTH, (null), DPF: 1, use: 1
--> engine on handled
--> engine start handled
>>>> device is visible NOW!
--> start needle sweep (900 ms)
--> update ECU status
--> update ECU status
--> stop needle sweep (after: 900 ms)
--> update ECU status
--> Z19DTH: 0 errors
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> no KEY-in status received within... requesting from CIM...
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> activation request, screen: 131
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 83
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 200ms
--> no action found for key: 0x05, count: 2
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 200ms
--> no action found for key: 0x05, count: 2
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 2, action: 0x26, repeat override: 0
--> update ECU status
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 800ms
--> no action found for key: 0x05, count: 8
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x82, count: 1, action: 0x23, repeat override: 0
--> activation request, screen: 4
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 08
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> [KEY-UP] PID: 0x201, ID: 0x31, time: 800ms
--> no action found for key: 0x02, count: 8
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 02
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 01
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> activation request, screen: 131
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 83
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 200ms
--> no action found for key: 0x05, count: 2
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> no KEY-in status received within... requesting from CIM...
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x88, count: 1, action: 0x20, repeat override: 0
--> activation request, screen: 1
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 01
--> [KEY-UP] PID: 0x201, ID: 0x37, time: 200ms
--> no action found for key: 0x08, count: 2
DISPLAY: execute command at: 0, cmd: 90
DISPLAY: execute command at: 1, cmd: BF
DISPLAY: get screen definition: 01 / 02
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 08
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
GMLAN_ReadStatuses(254, 1) timeout!
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x82, count: 1, action: 0x23, repeat override: 0
--> activation request, screen: 4
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 08
--> [KEY-UP] PID: 0x201, ID: 0x31, time: 100ms
--> no action found for key: 0x02, count: 1
DISPLAY: execute command at: 0, cmd: 90
DISPLAY: execute command at: 1, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 02
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 01
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x82, count: 1, action: 0x23, repeat override: 0
--> activation request, screen: 4
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 08
--> [KEY-UP] PID: 0x201, ID: 0x31, time: 100ms
--> no action found for key: 0x02, count: 1
DISPLAY: execute command at: 0, cmd: 90
DISPLAY: execute command at: 1, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 10
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 02
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 01
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: 80
--> open item, screen: 0, item: 03
DISPLAY: get screen definition: 01 / 83
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> no KEY-in status received within... requesting from CIM...
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> activation request, screen: 131
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 83
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 100ms
--> no action found for key: 0x05, count: 1
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> update ECU status
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 200ms
--> no action found for key: 0x05, count: 2
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> update ECU status
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 700ms
--> no action found for key: 0x05, count: 7
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> activation request, screen: 131
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 83
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 1200ms
--> no action found for key: 0x05, count: 12
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> action found for key: 0x85, count: 1, action: 0x26, repeat override: 0
--> update ECU status
--> [KEY-UP] PID: 0x201, ID: 0x34, time: 900ms
--> no action found for key: 0x05, count: 9
--> update ECU status
--> update ECU status
--> update ECU status
--> no KEY-in status received within... requesting from CIM...
--> update ECU status
--> action found for key: 0x82, count: 1, action: 0x23, repeat override: 0
--> activation request, screen: 4
--> send open menu request
DISPLAY: execute command at: 0, cmd: 00
DISPLAY: get screen definition: 01 / 08
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> [KEY-UP] PID: 0x201, ID: 0x31, time: 600ms
--> no action found for key: 0x02, count: 6
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 04
--> update ECU status
--> update ECU status
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 02
DISPLAY: execute command at: 0, cmd: BF
DISPLAY: get screen definition: 01 / 01
--> update ECU status
DISPLAY: execute command at: 0, cmd: 80
--> open item, screen: 0, item: 02
DISPLAY: get screen definition: 01 / 82
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> keyin changed 6 -> 0
--> engine off handled
--> update ECU status
--> keyin changed 0 -> 6
>>>> device is hidden NOW!
--> engine stopped handled
DETECTED ENGINE: Z19DTH, (null), DPF: 1, use: 1
--> engine on handled
--> engine start handled
--> start needle sweep (900 ms)
>>>> device is visible NOW!
--> stop needle sweep (after: 900 ms)
--> update ECU status
--> update ECU status
--> Z19DTH: 0 errors
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> update ECU status
--> keyin changed 6 -> 5
--> engine stopped handled
--> engine off handled
--> update ECU status
--> update ECU status
--> keyin changed 5 -> 4
>>>> device is hidden NOW!
--> keyin changed 4 -> 0

!!! SLEEP !!!

!!! WAKE UP !!!
--> doors close button detected!
--> doors open button detected!
--> multiple (1) press of door open button detected!

!!! SLEEP !!!

!!! WAKE UP !!!

-----------------------------------------------
Date: 26.03.2018 - 18:28:55
End log file